liquid melt
英 [ˈlɪkwɪd melt]
美 [ˈlɪkwɪd melt]
网络 液融状
双语例句
- Lens can't touch water or some liquid which are easy melt with water, whole glasses can't be cleaning by ultrasonic wave or liquid.
镜片不能直接接触水或水融性液体，整体眼镜不能使用超声波或液体直接清洗。 - The high-temperature liquid matrix materials will melt the surface zone of another solid block of metal alloy, so that the metallurgical bonding occurs between the two materials.
镶铸复合金属材料是将不同的金属材料采用镶铸工艺使它们连在一起，利用基体材料的高温液体将另一种金属合金表面熔化，使它们产生冶金结合或部分冶金结合。 - Study on preparation and performance of PEO/ montmorillonite liquid hot melt adhesive
PEO/蒙脱土液态热熔胶的制备与性能研究 - The addition of some solids can lower the freezing point of a liquid, a principle used when salt is applied to melt ice on frozen surfaces.
添加某些固体能够降低液体的冰点，这个原理应用于以盐来融化冰冻表面的冰。 - It is always difficult to make metal liquid and insert melt with efficient metallurgical combination.
镶块与金属液之间产生有效的冶金结合历来是铸造工艺的难点。 - So our life become indigent, for every facet is only a lay at most, while life is multifaceted, you must become more liquid, more capricious, easier to melt, and easier to assimilate;
因此，我们的生命变得贫乏，因为每一个方面最多也只是一个层面，而生命是多层面的，你必须变得更流动、更善变、更易融化、更易吸取； - Polypropylene transcrystallines nucleate at the surface of liquid crystalline fibrils formed in-situ in polypropylene melt.
偏光显微镜的观察揭示出在聚丙烯熔体中原位形成的液晶聚合物微纤诱导了聚丙烯横穿晶的形成。 - Liquid crystalline polymer/ PA1010/ French chalk hybrids were prepared by melt intercalation.
用液晶聚合物（LCP）作增容剂，采用熔融插层法制备了PA1010/滑石粉（FCP）杂化材料。 - The Level-Set approach was adopted to deal with some factors such as deposited track, liquid/ vapor interface, which considered surface tension gradient ( the major driving forces for the melt flow), interface curvatures, buoyancy and convection heat loss.
通过水平集（levelset）方法处理熔积轨迹、液/气界面等因素，考虑了熔体流动的主要驱动力表面张力梯度、表面曲率以及浮力等。 - Vaporization of trace element associated with pyrite is mainly composed by three steps: ( 1) transport of molecules or atoms through the bulk liquid melt to the melt surface;
痕量元素从熔融体到主气流的传输中要经历三个阶段：（1）熔融体内痕量元素分子或原子的输运过程； - Using liquid quenching technique, the change of growth mode of graphite in cast iron melt was analysed. Based on the interface structure theory of crystal growth, the concept of multiplication of spiral growth steps was advanced and two basic multiplication models were given out.
采用液淬技术，对铸铁熔体中石墨生长方式的转变进行了研究，提出了螺旋台阶增殖的概念并给出了两个基本模型。 - A three-dimensional mathematical model coupled turbulent flow with transfer heating has been established to simulate the flow field and solidification of liquid steel in molten pool in continuous casting using a wedge type melt delivery system.
针对双辊薄带连铸过程，使用了耦合湍流流动和凝固传热的三维数学模型，模拟计算了使用楔型布流系统浇注时，连铸熔池内钢水的流动形态和凝固情况。 - The bonding pressure was related to the contact area between solid phases, spreading of liquid metal on ceramic surface, thickness of reaction layer and concentration of low melt point metal in joint.
连接压力影响固相与固相的接触面积、活性液态金属在陶瓷表面的铺展、反应层的厚度以及接头中液体金属的量； - A series of in situ composites were obtained by melt blending thermoplastic resin polysulfone ( PSF) and four thermotropic liquid crystalline polymers ( TLCP) using three methosd: ( 1) extruded by melt index machine directly;
将热塑性树脂聚砜与4种自制的热致液晶聚合物熔融共混，制备原位复合材料，采用了3种制样方法：①毛细管直接法； - Liquid crystalline melt spinning of mesophase pitch
中介相沥青液晶熔体纺丝 - For maintaining the continuous growth of YBCO, the composition of Y, Ba and Cu in raw sample has to be adjusted so as to make yttrium and barium enrichments in the liquid phase at the YBCO crystal growth front during the melt growth process.
为连续生长具有一定取向的YBCO样品或大块YBCO超导体，需要将融化生长过程中生长前沿的液相成分调整为富Y和Ba的成分。 - Individual mineral Quartzs in sulfide-rich quartz vein contain many fluid inclusions consisting of mainly CO2-rich liquid, fluid-melt inclusions and melt inclusions.
河台金矿床富硫化物石英脉单矿物石英中富含以富CO2液相为主的流体包裹体、流体熔融包裹体及熔融包裹体。 - Low melt point paraffin was prepared by the compounding of solid paraffin with liquid paraffin, the water was dispersed into the low melt point paraffin by using SDBS as surface active agent, then epoxy resin was added to prepare water-containing phase change material.
以固体石蜡和液体石蜡进行复配制得低熔点石蜡，采用十二烷基苯磺酸钠（SDBS）作表面活性剂，将水分散于低熔点石蜡中，然后加入环氧树脂，制得含水型树脂基定形相变材料。 - To elaborate the method of storage and conveyance of liquid bromine according to the charateristic of bromine of low melt point, low vaporization point, easy to react in normal environment, high corrosiveness at acid condition and so on.
根据溴低熔点，低汽化点，常态下易发生化学反应，且在酸性条件下具有很强的腐蚀性等特点，阐述液溴的贮存与输送方法。 - The main advantages and shortage of liquid polymer infiltration method, chemical vapor infiltration method, and reactive melt infiltration method for fabricating C/ C-SiC braking materials are summarized, and reactive melt infiltration method is a promising industrialization technology.
综述了先驱体转化法、化学气相浸渗法和反应熔体浸渗法制备C/CSiC复合材料的优点及其不足，指明了反应熔体浸渗工艺是一种具有市场竞争力的工业化生产技术。 - On the basis of 3 D temperature fields calculation of aluminum alloy casting, the liquid face shrinkage capacity method of varied several melt pool is put forward to predicate shrinkage cavity;
在铝合金铸件三维温度场计算的基础上，提出了采用动态多熔池等效液面收缩量法对缩孔进行预测； - The first is defined as melt-solution-precipitation mechanism; Ti powder in the combustion front is molten at high combustion temperature, W and C are dissolved into liquid Ti, Ti-W-C melt is formed and ( Ti, W) C is precipitated from the Ti-W-C melt.
熔化-溶解-析出机制：燃烧高温使燃烧前沿Ti粉熔化，W、C溶解于熔融Ti中，而后（Ti，W）C从Ti-W-C熔体中析出。 - The liquid separation behaviors of 10%~ 30% Co Cu alloys were investigated by means of melt glass deep supercooling technology.
用金相分析法对含10%～30%CoCu合金液态深过冷条件下的液相分解行为进行了研究。 - Stability analysis of a planar liquid/ solid interface of directional solidification in pure melt under perturbation of a far-field flow
远场来流作用下纯熔体液固平直界面的稳定性分析 - Montmorillonite was modified by mechanical chemistry, using one kind of ionic liquid as modifier, and then PP/ montmorillonite composite prepared by melt blending. Testing results show this composite have higher thermal stability and mechanical properties.
采用机械力化学法制备了有机蒙脱土，再通过熔融共混制得了聚丙烯/蒙脱土纳米复合材料，力学性能和热性能提高。 - The temperature-measuring techniques for liquid metal melts of copper, aluminum and the melt in a cementite furnace etc.
着重讨论了渗碳炉、铜、铝等液态金属熔体温度检测技术。 - Producting closed grained and nearly spherical semi-solid slurry, upgrading the wettability between reinforced particles and liquid metal melt and the uniformly distribution of the reinforced particles are the keys to product metal matrix composites.
制备组织为近球形的优良半固态浆料以及提高增强颗粒与金属熔体间的浸润性，使增强颗粒均匀分布在浆料之中是制备金属基复合材料的关键。 - For this reason, the mechanism and phenomenon of fragmentation of liquid melt jet pouring into coolant pool is of great significance in the case of the failure of IVR-ERVC.
因此，熔融液柱注入冷却剂过程中的碎化机理与现象的研究是IVR-ERVC失效负面风险评价的重要组成内容。 - Effects of the liquid structural change on crystallization orientation were investigated. It is found that the melt after the liquid structural change preferably grew on the high index crystal plane with the solidification process, which was responsible for the branching of low index single crystal plane.
液-液结构转变对晶体生长取向的影响主要是随凝固长度增加，液-液结构转变使合金实现高指数晶面取向，加剧了低指数晶面分支现象。 - Many researches have been taken on the ultrasonic degassing effect in the liquid metal melt.
在对液态金属熔体除气效果方面，得到了较多的研究。